Current limit switch
Current limiters are ment to limit the current trhough a DC-motor. The limiter can switch off at a pre-determinated current. See below the details of the different types.
| Type | Construction | Nominal/peak current | Voltage |
|---|---|---|---|
| EAG30 (1805kB) | built-on | 1A (fixed/value on request) |
|
| SA12 (181kB) | housing | Max. 30A (adjustable) | 12V / 24V |
| SA14 (177kB) | housing | Max. 14A (adjustable) | 24V |
| ROBOtronic (1638kB) | housing | 12A | 24V |
| Robo Tronic type 1 (110kB) | housing | 12A | 24V |
| Robo Tronic type 2 (147kB) | housing | 12A | 24V |
| Robo Tronic type 3 (151kB) | housing | 12A | 24V |
| Robo Tronic type 4 (104kB) | housing | 12A | 24V |
| Robo Power (121kB) | housing | 12A | 24V |
Current limit switch - EAG30
EAG30 Datasheet (80kB)
The End Stop switch EAG30 is used for current switch-off in combination with the motors of the G30 series. It is used in lifting devices, agricultural machinery, hospital beds etc.
The EAG30 is designed explicit for the G30 motors. The EAG30 is directly connected on the motor pins. The supply is soldered on the print. By using SMD components at the PCB, the EAG30 is compact. It has the same diameter as the G30 motor. As soon as the current reaches the limit, the supply will be switched off. The circuit will be reset when power is disconnected or reversed. Motor peak currents are ignored by the build in delay of about 0.5 sec.
Options
It is also possible to mount the EAG30 separate from the motor. For this application the unit will be connected with a cable. Other current limits than 1A are available for larger series.
| Specifications | |
|---|---|
| Supply: | 24 VDC |
| Max current: | standard 1 A |
Other values
on request
